December 1, 2022 SMACNA Interview: Joe Samia President of Central Consolidated, Inc. talks about how his business has been positively impacted by recent infrastructure funding. View Now
November 17, 2022 SMACNA Interview: Guy Gast and Angie Simon (New Horizons Foundation) Guy Gast and Angie Simon joined Jeff Henriksen for a discussion about the New Horizons Foundation, its mission and how it serves members. View Now
November 17, 2022 SMACNA Interview: Dan Monahan Dan Monahan, President J.E. Monahan Companies is interviewed by SMACNA’s Seth Lennon during SMACNA’s Annual Convention. Dan is based in Queensbury NY. View Now
November 10, 2022 SMACNA Interview: Daniel Miranda President of Just Right Heating and Cooling talks about how his business weathered COVID and outlines some of the plans for the future. View Now
November 10, 2022 SMACNA Interview: Kyle Bellmon President of United Mechanical talks about the state of his business and his time as the IFUS chairman. View Now
Video An Introduction to the Sheet Metal Industry Learn more about the sheet metal industry and the career opportunities it has to offer by taking a look at some of the incredible projects our space has worked on. View Now
November 03, 2022 SMACNA Interview: Ernie P. Menold and Bob Atwell Leaders from Ernest D. Menold, Inc. talk about their work in the Philadelphia-area and how their company’s portfolio continues to evolve. View Now
October 27, 2022 SMACNA Interview: Angie Simon Former SMACNA president talks about the last two years at the association's helm and shares developments regarding Western Allied Mechanical and the Heavy Metal Summer Experience. View Now
October 27, 2022 SMACNA Interview: Kathy Kerber President of KSM Metal Fabrication talks about her company’s work on various projects within the aerospace sector, including a new jet for the U.S. Air Force. View Now
October 20, 2022 SMACNA Interview: Don Jackson VP of Risk Management at W. Soule outlines work on megaprojects and talks about his company winning the 2022 SMACNA Safety Innovation Award. View Now
October 20, 2022 SMACNA Interview: John E. Sickle, Jr. President of Duct Fabricators, Inc and Ohio Fabricators, Inc. talks about fire safety and his involvement with the Cleveland JATC. View Now
October 13, 2022 SMACNA Interview: Carol Duncan SMACNA President-Elect and General Sheet Metal CEO talks about issues including workforce development and risk management. View Now
October 13, 2022 SMACNA Interview: Matt Cramer Owner of Dee Cramer, Inc. talks about some of his experiences within the industry. View Now
October 06, 2022 SMACNA Interview: Joseph Lansdell President of Poynter Sheet Metal talks about industry issues and marketing best practices. View Now
September 29, 2022 SMACNA Interview: Tony Kocurek and Joe Sellers SMACNA President Tony Kocurek and SMART General President Joe Sellers set a positive tone for 2022 and beyond. View Now
September 22, 2022 SMACNA Interview: Nathan Cooper 2022 SMACNA Chapter Executive of the Year talks about efforts to strengthen the workforce. View Now
September 22, 2022 SMACNA Interview: Tom Martin Incoming SMACNA Secretary-Treasurer examines priorities for the industry in 2022 and beyond. View Now
Video Dec 16 2021 SMACNA Interview Video: Fisher Balancing Fisher Balancing has doubled in size since the beginning of the pandemic. How has the company handled all the changes? View Now
Contractor Spotlight Video Jul 23 2021 Contractor Spotlight Video: R.F. Knox Company, Inc. R.F. Knox Company, Inc. is a fourth-generation straight-line sheet metal business based in Atlanta, Georgia. SMACNA met with Jack Knox, president, and his team about the company’s commercial HVAC work, which makes up 85% of its business. View Now
Contractor Spotlight Video May 12 2021 Contractor Spotlightlight Video: EB&I The pandemic helped create some amazing opportunities for contractors like Tony Kocurek, owner of Energy Balance &, Integration (EB&I), an Albuquerque, N.M.-based TAB business. In 2020, EB&I helped customers from hospitals to casinos address their changing HVAC system needs, not only to deal with extreme climate issues, but also due to the pandemic. View Now
Contractor Spotlight Video Oct 15 2020 Contractor Spotlight: Vidimos, Inc. SMACNA recently spoke with Scott Vidimos, president and third-generation leader at Vidimos, Inc., and his team about how the industrial sheet metal contractor has evolved its business and technology to meet customer demand and needs over its last 75 years in business. View Now
Contractor Spotlight Video Aug 13 2020 Contractor Spotlight: Poynter Sheet Metal In response to growing customer demand, Poynter Sheet Metal has expanded its business to include modular construction which also included a 55,000 square foot expansion, bringing the total facility to 160,000 square feet. View Now
Video Jan 30 2020 SMACNA Video: Becky Wiseman, PM Contracting, Inc. In this video, SMACNA sits down with Becky Wiseman, PM Contracting, Inc. in Kansas City, MO. Wiseman talks about how relationship-building has helped the growth of her company. She also talks about how the company will be expanding into testing and balancing and fire life safety. View Now
Video Jan 28 2020 SMACNA Video: Daniel Miranda SMACNA's Jeff Henriksen sat down with Daniel Miranda, president, Just Right Heating & Cooling in Portland, Oregon to discuss Daniel’s background, immigration to the United States, and the current growth and opportunity he has experienced owning his own business. View Now
Video Jan 02 2020 SMACNA Video: Wayne Greenwood, JEC Service Company In this video, SMACNA talks with new Board member Wayne Greenwood, president of JEC Service Company in Waltham, MA. He talks about his company and their focus on customer service and technology. He also describes his path to president of the company. View Now
Video Dec 20 2019 SMACNA Video: Zach Russi, Western Allied Mechanical SMACNA met with Zach Russi, Vice President, Western Allied Mechanical. Zach speaks about the amazing amount of growth at his company and how this has created a need for more workers, both on the craft and non-craft side of the business. View Now
Contractor Spotlight Video Dec 12 2019 SMACNA Contractor Spotlight: Hermanson SMACNA visited Hermanson earlier this year as they were embarking on a major shop redesign to modernize their equipment and improve shop flow during the fabrication process. View Now
Video Nov 21 2019 SMACNA Video: Shasta Erickson Meet new SMACNA board member Shasta Erickson, Vice President, Finance, of Miller Bonded in Albuquerque, New Mexico. View Now
Video Nov 07 2019 SMACNA Video: Chris Walker, CAL SMACNA SMACNA talked with Chris Walker, executive vice president of CAL SMACNA, immediately after he was awarded Chapter Executive of the Year. View Now
Video Nov 04 2019 SMACNA Interview: Joseph Lansdell, Contractor of the Year SMACNA’s Contractor of the Year is Joseph Lansdell of Poynter Sheet Metal. In this video, hear Joseph talk about what motivates him to volunteer for SMACNA as well as in his local area. View Now
Contractor Spotlight Video Nov 04 2019 SMACNA Contractor Spotlight: General Sheet Metal SMACNA turns its spotlight on General Sheet Metal (GSM) in Clackamas, Oregon. The company, owned by SMACNA board member Carol Duncan, specializes in mechanical, architectural, and HVAC fabrication, installation, and repair. View Now
Video Oct 31 2019 SMACNA Video: Angie Simon, SMACNA President SMACNA talks with Angie Simon, new SMACNA president for 2019-2020 and president of Western Allied Mechanical. View Now
Contractor Spotlight Video Oct 14 2019 Contractor Spotlight: ACP Sheet Metal/Midwest Fabricators The latest Contractor Spotlight visits ACP Sheet Metal and MidWest Fabricators in Oklahoma City, OK. ACP is a straight line sheet metal shop that happens to have SMACNA President, Nathan Dills as its owner and president. View Now
Video Oct 14 2019 SMACNA Video: Paul Heimann, Welsch Heating & Cooling The grand finale of SMACNA's 75th Anniversary is coming up. Hear Paul Heimann, vice president, Welsch Heating & Cooling, talk about how SMACNA has acted as a support network for him and the company he works for. View Now
Video Oct 02 2019 SMACNA 75th Anniversary Video: Randy Novak SMACNA’s 2019 Annual Convention is a little more than two weeks away and so is the finale of SMACNA’s 75th Anniversary. View Now
Video SMACNA Video: James Morgan, President, Worcester Air SMACNA interviewed James Morgan, president, Worcester Air, Ashland, Massachusetts, as part of SMACNA’s 75th anniversary kick-off. View Now
Video Sep 04 2019 SMACNA 75th Anniversary Video: Dick and Matt Cramer As we head into SMACNA’s 2019 Annual Convention and the culmination of SMACNA’s 75th Anniversary, listen to Dick and Matt Cramer of Dee Cramer Inc. reflect on the history of SMACNA and how the organization has progressed through the years. View Now
Contractor Spotlight Video Aug 19 2019 Contractor Spotlight Video: Therma SMACNA recently visited Therma, a leading mechanical services company focused on designing, building, and servicing custom and complex mechanical systems. View Now
Contractor Spotlight Video Aug 12 2019 Contractor Spotlight Video: Western Allied Mechanical SMACNA visited Western Allied Mechanical (WAM) in Menlo Park, California. The company is home to SMACNA president-elect Angie Simon who is also WAM’s president. View Now
Video Aug 01 2019 SMACNA Video: Carol Duncan On the eve of SMACNA's 75th anniversary, Carol Duncan, CEO of General Sheet Metal, talks about what SMACNA has meant to her and her company throughout the years. View Now
Contractor Spotlight Video Jul 12 2019 Contractor Spotlight Video: California Sheet Metal SMACNA visited the west coast for a series of Contractor Spotlight video productions. Our first stop was California Sheet Metal, an employee owned, architectural sheet metal shop based in the San Diego area. View Now
Video Jun 28 2019 SMACNA Video: Guy Gast, Waldinger Corporation SMACNA interviewed Guy Gast, president, Iowa Division, The Waldinger Corporation, on the evolution of SMACNA over the past 75 years. View Now
Video Jun 12 2019 SMACNA Video: Tom Martin of T.H. Martin, Inc. SMACNA interviewed Tom Martin, president of T.H. Martin, Inc., on the ways SMACNA has helped him succeed in business. View Now
Video May 30 2019 SMACNA Video: Brian and Trenton Fluetsch of Sunset Air Inc. SMACNA talked with Brian Fluetsch, president, Sunset Air Inc., Lacey, WA, and his son Trenton Fluetsch, who is currently service manager at the company. View Now
Contractor Spotlight Video Apr 19 2019 Contractor Spotlight Video: Lor-Don, Ltd/Technicair In this Contractor Spotlight, SMACNA features Lor-Don, Ltd/Technicair, a Canadian contractor with a 140,000 sq. ft. facility that specializes in the design, manufacturing, and installation of large-scale, complex industrial projects, but also services any individual consumer requests as well. View Now
Video Feb 25 2019 SMACNA Video: Mark Watson Mark Watson, treasurer, Climate Engineering, in Hiawatha, Iowa, shares his thoughts on the big leadership change that is taking place in his company as he and his brothers move on. View Now
Video Feb 19 2019 SMACNA Video: Bill Ecklund and Dan Kelly of Felhaber Larson Bill Ecklund and Dan Kelly of Felhaber Larson on being SMACNA's law partner since its inception. Felhaber Larson has been SMACNA's counsel for 70 + years and the two "have grown up together." View Now
Video Feb 19 2019 SMACNA Video: Carol Duncan of General Sheet Metal Corporate culture is important to Carol Duncan, the CEO of General Sheet Metal in Clackamas, Oregon. In her interview she talks about creating a corporate culture that has increased the level of involvement of her employees and is keeping them happy. View Now
Video Jan 25 2019 SMACNA Video: A Nod to the Past, but Focused on the Future SMACNA unveiled a new multi-purpose video at the SMACNA Board meeting and simultaneously at AHR Expo (2nd half of video only). View Now
Video Jan 25 2019 SMACNA Video: Focused on the Future SMACNA's new multi-purpose video features a hard-hitting, fast paced roundup of various high profile projects showcasing SMACNA members at work. View Now
