Search

Architectural Sheet Metal Quality Assurance Guide

Developed to provide guidance in the evaluation of exterior sheet metal building components - roofing systems, exterior walls, flashings, copings, etc. - during initial construction and for ongoing condition assessments and maintenance. The manual can assist owners/operators that may have limited knowledge and experience in the specifics of architectural sheet metal components, specification, fabrication, installation, or evaluation. The manual can also serve as a procedural inspection guide for experienced professionals who review architectural sheet metal systems regularly.

Phenolic Duct Construction Standards

This is the first edition of the SMACNA Phenolic Duct Construction Standards. This American National Standard (ANSI/SMACNA 022-2015) contains instruction, tables and details intended to provide basic phenolic duct fabrication and installation standards to the industry. The standard includes model project specifications, duct performance characteristics, specifications and closures, fittings and connections, reinforcement, hangers and support, accessories, and an inspection checklist. The standard is applicable for ducts up to 80 in. x 80 in. size that operate to 4 in. wg positive pressure class and to 3 in. wg negative pressure class.
 

Energy Systems Analysis and Management

This timely document provides an overview of a variety of energy-related business opportunities for commercial, residential, and institutional buildings. Presents contractors, building owners and operators, facility managers, and system designers with the tools needed to evaluate an existing facility for energy savings potential. Addresses both new construction and retrofits. Includes energy conservation management, the energy audit and energy estimating procedures. HVAC system maintenance and indoor air quality, energy management maintenance and monitoring, energy recovery systems and energy recovery system investment analysis.

HVAC Systems Sound and Vibration Procedural Guide

The HVAC Systems Sound and Vibration Procedural Guide details methods and processes that, when followed, provide repeatable measurement and verification of sound and vibration (S&V) levels, as required by new and emerging building codes. Instrumentation standards, sound measurement procedures, vibration inspection methods, and vibration measurement procedures are included in the guide. Written for trained sound and vibration testing supervisors and technicians, this publication also is a useful aid to assist designers developing project specifications for sound and vibration testing requirements.

Achieving Spatial Coordination Through BIM

This guide is an industry reference for HVAC and MEP contractors who are doing spatial coordination in a BIM environment. This guide addresses how contractors can incorporate leading-edge technologies and workflows into the spatial coordination aspect of their projects. It provides contractors with an outstanding educational resource for their employees who have to make these decisions.

This guide explains:

• How to review, use, and contribute to the many documents that establish the scope of that work.
• How to set up a BIM coordination program in your company.
• How to manage the BIM execution plan.
• BIM technologies for an IT infrastructure.
• Proven best practices for profitably implementing spatial coordination through BIM.
• Evaluating spatial coordination contract language.

HVAC Systems Commissioning Manual

Commissioning is the process of ensuring the HVAC system meets the owner’s operational requirements. This American National Standard, ANSI/SMACNA 014-2013, expands on this and also includes LEED project information, current terminology for commissioning of existing buildings as well as other updates to resources and technologies. The commissioning process works effectively for projects large and small, simple as well as complex and applies to the commercial, industrial and institutional markets. This practical how-to guide is for contractors, owners and engineers interested in learning about commissioning for new buildings and re-commissioning for existing buildings. Separate chapters are devoted to the different levels of commissioning, including basic, comprehensive and critical system commissioning. A thorough explanation of re-commissioning leads one through the preliminary investigation, survey and documentation phase, the design and installation of system modifications and the actual re-commissioning test. The appendix contains a sample HVAC Systems Commissioning Specification, complete from the planning to the final execution stage. Additionally, the topics functional performance testing, operator training, MSDS forms and equipment data sheets and O&M manuals are covered. It also includes sample reports and timesaving pre-start and start-up checklists. Use of these tested and proven sample forms and specification will save hours of valuable time.
 

OSHA Field Inspection Reference Manual

This manual provides detailed information on the duties, responsibilities and procedures associated with the majority of OSHA Inspections conducted by OSHA Compliance Safety and Health Officers (CSHO).

Architectural Sheet Metal Manual

This completely revised publication contains the most comprehensive set of recommended practices available for proper design and installation of custom-fabricated architectural sheet metal including roof drainage system design for scuppers, gutters and downspouts. Features more details in the historical restoration section on skylights, cornices and spires; new moisture and maintenance guide with underlayments; mechanical fasteners and soldering guidance; and enhanced metals selection data. Offers new construction techniques and alternative methods of design and installation reflecting climatic conditions and rainfall rates. An upfront, fast “look-up” key speeds information retrieval. Also covers flashing, metal roofs, copings, gravel-stop fascia. Includes wind uplift pressure test reports confirming superior performance of custom-fabricated metal roofing. Applies to commercial, industrial and residential buildings.
 

HVAC Air Duct Leakage Test Manual

This American National Standard, ANSI/SMACNA 016-2012, covers revised leakage criteria and builds on the proven methods for testing ductwork for air leaks from the first edition. Contains updates to the expected leakage rates for ductwork constructed to the SMACNA HVAC Duct Construction Standards—Metal & Flexible, duct leakage test procedures, recommendations on use of leakage testing, types of test apparatus and test setup and sample leakage analysis. Includes a new educational chapter for designers and specifiers, to aid in the specification and implementation of duct leakage and testing methods.
 

Guide for Free Standing Steel Stack Construction

Contractors, designers, and engineers will find this guide a very valuable resource, as tables containing hundreds of stacks are detailed and ready to go.

This new publication updates the 1996 Guide for Steel Stack Construction, second edition, incorporating text and tables. New to the 2011 publication are design considerations for free standing stacks under resonant vibration, established limits on stacks fitted with testing platforms, larger stack selection diameters, and consideration of custom designed anchoring systems instead of a standardized schedule. Includes tables for selection of free standing stacks from 20 feet to 120 feet high, and diameters to 120 inches, companion flange, stiffener sizes and stacks with access ladders and platforms.
 

Building Systems Analysis and Retrofit Manual

The second edition of the Building Systems Analysis and Retrofit manual provides methods to assess the major energy using elements of an existing building—electrical (lighting and motors) and HVAC. It provides a process that begins with a walk-through audit. Methods discussed include using building systems automation, envelope improvements, and demand control strategies including thermal energy storage. Contractors interested in new opportunities will find market entry guidance and ideas to assist them in the development of new business strategies that target the renovation of existing buildings. Existing buildings are often located near public transportation and development typically occurs on a building’s existing footprint. These two “green” drivers may combine with basic economic factors to produce a compelling incentive for many prospective building owners to choose renovation of an existing building over the construction of new facilities.
 

Guyed Steel Stacks

The first edition of the Guyed Steel Stack manual is devoted exclusively to vertical, uniform diameter guyed stacks with welded longseam or spiral lockseam fabrication for at-grade or penetrated roof installations. This guide was developed to provide all pertinent information for guyed stack construction through the use of selection tables listing specific combination of stack diameter, stack height and maximum wind velocity.
 

Round Industrial Duct Construction Standards

The American National Standard (ANSI/SMACNA 005-2013) expands the scope of the 1999 version, updating the duct materials to include aluminized steel, temperature correction factors for round industrial and minimum decimal thickness for aluminum duct selection tables. Offers a standardized, engineered basis for design and construction of industrial ducts of Classes 1 to 5 air. Includes a spiral duct chapter for Classes 1 and 2 air that covers design pressures ranging from 30 in. wg negative to 50 in. wg positive, plus carbon and galvanized steel tables. Expanded tables for stainless steel and aluminum, expanded tables for duct sizes up to 96 in. diameter, introduction of a new Duct Class 5 for systems handling corrosives and spiral lockseam pipe.
 

Architectural Sheet Metal CADD Drawings

CADD drawings of the illustrations in SMACNA's 7th edition of the Architectural Sheet Metal Manual are available for download and use in CAD programs. These drawings illustrate the best practices in custom architectural sheet metal work. Purchase individual files in DWG format for immediate download or get all 188 figures in DWG format on an individual CD-Rom. Architects and designers are encouraged to use this invaluable resource to assure that their specifications reflect professionally vetted design details.